MATERIAL SPECIFICATION – WOOD (Field Test)
Description
Quality
Source
Wood
Teak (SAG),Kapur,Red Merrandi / Ghana Teak / Nigerian Teak / Other
Documentary Evidence of implementation of Field Test System not Available and shall be Implemented immediately.






Sr. No.
Field Test Details
Required Results
Actual Results
Remarks
01
Size
As per drawing / order
As per actual









Documentary Evidence of implementation of Field Test System not Available and shall be Implemented immediately.
02
Section of wood
As per drawing . order
As per actual
03
Colour of wood
As per specified quality
As per actual
04
Type of wood
Sal wood / Teak wood / C.P. Teak wood / Burma teak / Kapur / Red Merrandi  etc.
As per actual
05
Diagonal of frame
Both should be correct
As per actual
06
Right angle of frame (both)
Both should be in 90 degrees
As per actual
07
Edge of frame
Sharp
As per actual
08
Depth of shutter notch
As per drawing
As per actual
09
Length of horn on either side
As per drawing (min. 3”)
As per actual
10
No. of bracing
4 Nos.
As per actual

a) Top

50 x 25 mm (2” x 1’) at 45 degree 2 Nos.
As per actual

b) Centre
50 x 25 mm (2” x 1’) at Patti
As per actual

c) Bottom
M.S. angle (25 mm x 25 mm x 5 mm or as per requirement
As per actual
11
Presence of holes / cracks / knot / termites and bends
Should be free from all defects
As per actual
12
Checking of joints
It should be as drawing
As per actual