Sr. No.
Field Test Details
Required Results
Actual Results
Remarks
01
Type of shutter
Pull and push type
As per actual






Documentary Evidence of implementation of Field Test System not Available and shall be Implemented immediately.

02
Check whether C.R.C.A. or H.R.C.A. sheet used for laths
Should be as per purchase order
As per actual
03
Gauges of bottom lock plate and  loading arrangement
Should be as per purchase
As per actual
04
Type of section used for laths with gauge
16 / 18 / 20 gauge or should be as per purchase order
As per actual
05
Check shutter laths with gauge
4 to 4 No or as per drawings
As per actual
06
Top cover in one piece with centrally supported plate and it gauge
In one piece of 20 / 22/ 24 gauge or as per order
As per actual
07
Diameter of ball bearing and spring with their No.
Check No. and size as per order
As per actual
08
M.S. pipe shaft diameter
Generally 40 mm of gauge or as per order
As per actual
09
Bracket Plates and guide rail
As per order
As per actual
10
Stoppers on each side
As per order
As per actual
11
Handle
2 Nos. riveted or as per order
As per actual
12
Hold fast at equal distant
30 cm in length and 3 Nos. on each side or as per order
As per actual
13
Red oxide
Uniform one coat
As per actual
14
Extra locking arrangement
1 No. in central or as per order
As per actual
15
Overall finishing / fixing / locking operation
Should be neat and proper
As per actual
16
All fittings, fixtures etc.
In right angle, in line and level
As per actual
17
Greasing for spring and guide rails
Should be sufficient for smooth operation
As per actual